Saab Key Replacement
Losing your car keys or misplacing them can be extremely annoying. If you have an extra key, adding a new key to your car is relatively inexpensive and simple.
You'll need to get rid of the old electronic key fob and program it into your car using a saab Technology 2 device. If you delay this process, it will cost you.
Keys lost or stolen
It is as easy as ever to copy the key to your car as it was 20 years ago. The only difference is that modern keys are equipped with an electronic chip in them. These chips provide a good deal of protection against key theft and copying. However, this doesn't mean that you'll never lose your key.
If you do lose your keys, don't panic! The first thing to do is to look over the places in which you typically store your keys. They may be hidden inside your pants or jacket or even in the floor just next to your front door. If you are unable to find your keys, contact locksmiths who will come to your vehicle to help you locate them.
A dealer can make you an entirely new car key if all your keys are missing. This can be expensive and take several days. Instead we can reprogram your existing computer's EEPROM to save you money.
The ignition key on the 03-11 SAAB is not very robust. The buttons can break and they can get stuck. You should make a copy of your ignition key if you just have one. This will save you from any inconveniences.
Lockouts
Saab owners are advised to carry a spare key, as it is much easier to replace a lost or stolen one. If you've lost your only key, it's an issue as it's quite expensive to add one and requires the dealer to install and program a new TWICE module (Column Integration Module on earlier vehicles) and a brand new key that is OEM (not from Amazon or eBay).
If remote control keys are not locking or unlocking the car, there are many possible reasons. Most likely is an empty battery on the key fob, but it can be caused by damaged buttons, water damage, signal interference or receiver module issues.
If your problem persists after you have tried all of these, you can try reprogramming your ignition key. saab 9-3 key fob programming is accomplished by changing the number count (in inverse the hex) to zero in the ECU. You'll need to remove the case of the key fob to accomplish this. The best method for doing this is by removing the emergency key from the fob. Then, you can employ a flathead for removing the case from the fob and expose the battery. Be cautious when doing this and don't drop or pour any liquids inside the fob as they could harm the electronic components within.
Broken Keys
The loss of your car keys or lost can be a difficult experience, especially if don't have an extra. You can reduce the stress when you get your replacement keys made in Bishopthorpe by a professional locksmith. It doesn't matter if you're located in the middle of nowhere or just a few blocks away we can supply you with a fresh set of electronic chip keys in no time.
Every Saab since 1995 is required to have an immobilizer system inside the vehicle, which makes it nearly impossible to steal your car without a key. A transponder is required to be embedded in the key to start the car as well as unlock doors. The key also needs a transmitter/transponder chip that needs to be matched with the car's computer module in order to work. This can only be done by dealers using a tool known as Tech-2 or other similar software.
It's important to not try to remove the broken key from your lock or ignition. It could damage the lock and result in other problems. When you try to force a broken lock or key out, it is likely to break the blade of the metal key or the mechanism of the lock. This can be much more expensive than having a key replacement made by a locksmith who is certified.
Replacement
Owners of Saab cars from about 1994 and up are advised to keep at least two keys that work for their vehicle. Replacing one key is expensive and difficult. The dealer will have to replace both the CIM (Column Integration module) or TWICE, based on the model. They will also need to program the key in order to work with the new module. The key that is claimed to be new from the aftermarket is usually not properly initialized and therefore cannot be programmed correctly when you are in need of one.
It is not uncommon for a battery to wear out in a keyfob over some time of use particularly if the fob is frequently used for locking and unlocking the car. The replacement of the battery on many SAAB 9-3 models is easy and doesn't require any special tools.
A mobile SAAB Locksmith can provide this service for 75% less than dealers would charge. A locksmith will not have to replace the computer in the vehicle, and they can modify your existing EEPROM to accept the new key. This saves a lot of money since a brand new car computer could be quite expensive. It makes sense to contact an on-line SAAB Locksmith whenever you need to replace the key fob on your car.